Dosage: The dose rate is 1mL for each 22lb of body weight. The formulation should be applied along the topline in a narrow strip extending from the withers to the tailhead.
Administration:
Squeeze-Measure-Pour System (1 Liter Bottle with 25mL Measuring Cap)
Attach metering cap to the bottle.
Select the correct dose rate by rotating the adjuster cap in either direction to position the dose indicator to the appropriate dose.
Gently squeeze the bottle to fill to level (any excess will return to the bottle) and then tip and apply to animal along topline.
BackPack (84.5fl oz/2.5 Liter Pack and 169 fl oz/5 Liter Pack)
Connect the applicator gun to the backpack as follows: Attach the open end of the draw-off tubing to the dosing equipment. (Because of the solvents used in the formulation, only the Protector Drench Gun from Instrument Supplies Limited, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage.
Replace the shipping cap with the draw-off cap and tighten down.
Attach draw-off tubing to the draw-off cap.
Gently prime the applicator gun, checking for leaks.
Follow the manufacturer's directions for adjusting the dose.
When the interval between uses of the applicator gun is expected to exceed 12 hours, disconnect the gun and draw-off tubing from the product container and empty the product from the gun and tubing back into the product container. To prevent removal of special lubricants from the Protector Drench Gun, the gun and tubing must not be washed.
Free standing 338fl oz/10 Liter bottle and 676fl oz/20 Liter bottle
Connect the applicator gun to the 338 fl oz/10Liter bottle as follows: Attach the open end of the draw-off tubing to the dosing equipment. (Because of the solvents used in the formulation, only the Protector Drench Gun from Instrument Supply Limited, or equivalent is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage.)
Replace the shipping cap with the draw-off cap.
Gently prime the applicator gun, checking for leaks.
Follow the manufacturer's directions for adjusting the dose.
When the interval between uses of the applicator gun is expected to exceed 12 hours, disconnect the gun and draw-off tubing from the product container and empty the product from the gun and the tubing back into the product container. To prevent removal of special lubricants from the Protector Drench Gun, the gun and tubing must not be washed.