Ivermax Pour-on For Cattle

Ivermax Pour-on For Cattle Manufacturers

• Aspen Veterinary Resources, Ltd.
  

  ×

  Ivermax Pour-on For Cattle | Aspen Veterinary Resources, Ltd.

  

  ---

  Collapsible Pack (33.8 fl oz/1 liter pack with dispensing cap)

  The dispensing cap is graduated in 5 mL increments. Each 5 mL will treat 110 lbs body weight. When body weight is between markings, use the next higher increment. Attach the dispensing cap to the bottle. Select the correct dose rate by rotating the adjuster top in either direction to position the dose indicator to the appropriate level. Hold the bottle upright and gently squeeze it to deliver a slight excess of the required dose as indicated by the calibration lines. By releasing the pressure, the dose automatically adjusts to the correct level. Tilt the bottle to deliver the dose. The “closed-off-shut” position will close the system between dosing. If the animal being treated weighs more than 550 lbs (250 kg), refill the dispensing cap to the additional amount required to provide the total dose for that animal and apply as directed.

  Collapsible Pack (84.5 fl oz/2.5 liter pack; 169 fl oz/5 liter pack with dosing gun/applicator)

  Because of the solvents used in Ivermax® Pour-On, the applicator gun from Simcro Tech, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage. Remove the shipping cap from the backpack container and replace with the vent cap provided. Attach the hose from the automatic dosing equipment to the outlet from the vent cap. Follow the applicator gun manufacturer's directions for priming the gun, adjusting the dose, and care of the applicator gun following use.

  Container (676 fl oz/20 liter container with draw-off device and dosing gun/applicator)

  Because of the solvents used in Ivermax® Pour-On, the draw-off device and applicator gun from Simcro Tech, or equivalent, is recommended. Other applicators may exhibit compatibility problems resulting in locking, incorrect dosage or leakage. Screw Feedlot pack cap and dip tube onto the 20 liter drum ensuring a tight fit. Connect the long 3m feed tube at one end to the spigot on the Feedlot pack cap and the other end to the applicator gun. Then follow the applicator gun manufacturer's directions for priming the gun, adjusting the dose, and care of the applicator gun following use.

  When the interval between use of the applicator gun is expected to exceed 12 hours, disconnect the gun, draw off tubing and dip tub and cap from the product container, empty the product from the gun and tubing back into the container and replace the shipping cap.

  Weight Dose 220 lb (100 kg) 10 mL 330 lb (150 kg) 15 mL 440 lb (200 kg) 20 mL 550 lb (250 kg) 25 mL 660 lb (300 kg) 30 mL 770 lb (350 kg) 35 mL 880 lb (400 kg) 40 mL 990 lb (450 kg) 45 mL 1100 lb (500 kg) 50 mL Mode of Action

  Ivermectin is a member of the macrocylic lactone class of endectocides which have a unique mode of action. Compounds of the class bind selectively and with high affinity to glutamate-gated chloride ion channels which occur in invertebrate nerve and muscle cells.

  This leads to an increase in the permeability of the cell membrane to chloride ions with hyperpolarization of the nerve or muscle cell, resulting in paralysis and death of the parasite. Compounds of this class may also interact with other ligand-gated chloride channels, such as those gated by the neurotransmitter gamma-aminobutyric acid (GABA).

  The margin of safety for compounds of this class is attributable to the fact that mammals do not have glutamate-gated chloride channels, the macrocylic lactones have a low affinity for other mammalian ligand-gated chloride channels and they do not readily cross the blood-brain barrier.

  Animal Safety

  Studies conducted in the U.S.A. have demonstrated the safety margin for ivermectin. Based on plasma levels, the topically applied formulation is expected to be at least as well tolerated by breeding animals as is the subcutaneous formulation which had no effect on breeding performance.

  RESIDUE INFORMATION: Cattle must not be treated within 48 days of slaughter for human consumption. Because a withdrawal time in milk has not been established, do not use in female dairy cattle of breeding age. A withdrawal period has not been established for this product in pre-ruminating calves. Do not use in calves to be processed for veal.

  WARNING! NOT FOR USE IN HUMANS.

  This product should not be applied to self or others because it may be irritating to human skin and eyes and absorbed through the skin. To minimize accidental skin contact, the user should wear a long-sleeved shirt and rubber gloves. If accidental skin contact occurs, wash immediately with soap and water. If accidental eye exposure occurs, flush eyes immediately with water and seek medical attention.

  Keep this and all drugs out of the reach of children.

  WARNING! FLAMMABLE!

  KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME,

  AND OTHER SOURCES OF IGNITION.

  The Material Safety Data Sheet (MSDS) contains more detailed occupational safety information. To report adverse effects, obtain an MSDS, or for assistance call Aspen Veterinary Resources,® Ltd. at 1-816-415-4324.

  Close
  No Recall

  More Info
• Aspen Veterinary Resources
  

  ×

  Ivermax Pour-on For Cattle | Aspen Veterinary Resources

  

  ---

  The dose rate is 1 mL for each 22 lb of body weight. The formulation should be applied along the topline in a narrow strip extending from the withers to the tailhead.

  Administration

  Measuring Cup (250 mL and 1 L bottles).

  The enclosed measuring cup is graduated in 5 mL increments. Each 5 mL will treat 110 lbs body weight. When body weight is between markings, use the next higher increment.

  Applicator Gun*

  (2.5 L and 5 L bottles)

  Because of the solvents used in Ivermax® Pour-On for Cattle (ivermectin), the applicator gun from Genesis Instruments (EZ Doser™ or Power Doser™) or equivalent is recommended. Other applicators may exhibit compatibility problems, resulting in locking, incorrect dosage or leakage.

  EZ Doser™ Operation:

  Set the recommended dosage by turning the dose adjuster. To prime the system, squeeze the handles repeatedly. This draws the fluid out of the container and into the EZ Doser™ barrel. To expel air out of the system, hold the EZ Doser™ in a vertical position and gently squeeze the handles until the air is purged. EZ Doser™ is activated by squeezing the handles. The pre-set dose will be given each time. The EZ Doser™ will automatically refill after each use.

  Power Doser™ Operation:

  Set the recommended dosage by turning the dose adjuster. Bleed the line with rapid actuation of the Power Doser™. Empty the air in the barrel by actuating the system so that the barrel fills 100% with product. Power Doser™ is activated by squeezing the knob. Power Doser™ will automatically refill after each use.

  Follow the applicator gun manufacturer’s directions for priming the gun, adjusting the dose, and care of the applicator gun following use.

  Weight lb (kg) /Dosage   220 lb (100 kg) / 10 mL   330 lb (150 kg) / 15 mL   440 lb (200 kg) / 20 mL   550 lb (250 kg) / 25 mL   660 lb (300 kg) / 30 mL   770 lb (350 kg) / 35 mL   880 lb (400 kg) / 40 mL   990 lb (450 kg) / 45 mL  1100 lb (500 kg) / 50 mL

  *Additional applicator guns can be purchased from Genesis Instruments, Elmwood, Wisconsin.

  Weight lb (kg) /Dosage   220 lb (100 kg) / 10 mL   330 lb (150 kg) / 15 mL   440 lb (200 kg) / 20 mL   550 lb (250 kg) / 25 mL   660 lb (300 kg) / 30 mL   770 lb (350 kg) / 35 mL   880 lb (400 kg) / 40 mL   990 lb (450 kg) / 45 mL  1100 lb (500 kg) / 50 mL

  *Additional applicator guns can be purchased from Genesis Instruments, Elmwood, Wisconsin.

  Close
  No Recall

  More Info